Primary Drive/Starters
PBK-5 3” open primary belt drive for 5-speed HD TwinCam Softails $2249
PBK-6 3” open primary belt drive for 6-speed HD Softails and Dynas $2249
These kits include Primo 3” belt, front pulley, rear pulley with complete clutch, domed clutch cover, Exile pulley cover, bearing/starter support plate and all necessary hardware. 2” version available on request. Supplied in ‘machined’ finish.
For polished finish Add $150
For black powder-coat finish - gloss, satin or textured (shown) Add $150
PBK-M 2” open primary belt drive for 6-speed HD Dynas with mid-controls $2249
(and 6-speed TwinCam Softails with mid-controls)
This kit includes Primo 2” belt, front pulley, rear pulley with complete clutch, domed clutch cover, Exile engine rotor cover plate, aluminum side-guard, bearing/starter support plate and all necessary hardware. Belt drive has shift-shaft bushing in stock position to use with stock foot controls. Supplied in ‘machined’ finish.
For polished finish Add $150
For black powder-coat finish - gloss, satin or textured (shown) Add $150
CFC Centrifugal Clutch assembly $699
Below about 1200 rpm the clutch is automatically disengaged. This makes riding a foot-clutch bike extremely easy. You do not need to touch the foot pedal to shift from neutral to first, or to pull away from a stop. You do not need to touch the foot pedal whilst coasting to a stop and shifting down through the gears. In fact, the only time you need to physically operate the clutch pedal is whilst accelerating up through the gears (as the rpm does not drop sufficiently between shifts). We can supply the centrifugal clutch assembly fitted to any of our belt drives, but it can also be used in many other applications, including closed primaries. Call for details.
PRIMO PRIMARY BELT KITS We use Primo components in all our belt kits and we can supply you with any product that Rivera Primo makes or distributes – simply supply us with the part number or detailed description. The super-clean primary drives that we use on our ground-up builds and Complete Bike Kits are a combination of the following parts:
A Primo 3” belt kit, an Exile Starter Kit (or Bearing Support if kick-start only), a Motor Brace Plate, a Front Pulley Cover and a domed clutch cover (not pictured but shown on virtually every bike).
P-48-76-S Primo 3” open belt kit, includes belt, pulleys and clutch. Pulley offsets available. $1049
ESK Exile Starter Kit (Softail-style transmissions – not HD 6-speed) $849
A very clean, minimal billet starter-mounting kit that is confined to the transmission. Use it in conjunction with our motor brace plate, or with no motor plate at all. Kit consists of bearing support plate, starter nose, ring gear and jackshaft extension.
EBS Exile Bearing Support – kick-only application (Softail-style transmissions – not HD 6-speed) $199
MBP Motor Brace Plate, no filter option $199
MBPF Motor Brace Plate, with spin-on filter $249
This billet aluminum brace plate mounts between the motor and the front two primary case bolt holes on the transmission. It is 3/4” thick, so although it is unobtrusive, it does provide adequate bracing. It can be used in conjunction with the Exile Bearing Support on kick-only bikes, or in conjunction with our Exile Starter Kit.
PC Exile Front Pulley Cover (5” length as used on our bikes) $349
Custom ‘length’ pulley cover Add $100
Available in various ‘lengths’ to accommodate different belt widths and offsets. We require the exact dimension from the outer edge of your front pulley to the mounting surface on the motor (or where the pulley cover will attach). We start from a CNC’d billet aluminum ‘rotor cover’ and then fashion the belt guard and side-skirt from 6061 aluminum plate before welding them to the billet piece. The welds are machined and sanded. Supplied in sanded finish. Will not fit 3.5” Primo belt kits.
PP-106-4-NH Aluminum domed clutch cover - very clean! $45
Starters
TC-1-89N2 Tech Products 2.0KW starter motor $449
SC Starter cover, billet $125
1215-0152 Kicker kit for all 5-speed Softail-style transmissions $699
1215-0153 Kicker kit for 6-speed Softail-style transmissions (not HD 6-speed) $699
These kick-start kits include polished billet aluminum end-cover, kick-arm and solid brass kick-pedal.
Rolling Chassis Deal
This deal is not designed to be a ‘bike kit’. It is simply a discount given for purchasing a large number of our parts. It represents considerable savings over buying each item individually.
RCD Rolling Chassis Deal: $7,999
For this price you receive the following:
- Rigid frame with axle. All other options as listed under frames. Top tube stretch up to 5”, front leg stretch up to 4”, add $200. Top tube stretch over 5”, front leg stretch 4-10”, add $400. For Softail frame with swing-arm etc., add $700. Wiring tubes add $75.
- For Softail frame with swing-arm etc., add $700. Wiring tubes add $75.
- Your choice of Monster rear wheel with tire, single or dual-flanged.
- Sprocket Brake Kit OR rotor and sprocket.
- Neck Bearings and Races.
- Hidden Fork-stop Kit.
- Urethane Handlebar Damper Kit.
- Sani-Tree triple trees.
- Your choice of genuine HD (Showa) fork tube and slider assemblies in stock length. Choice of FXST, FLST or FLT styles.
- Flush front axle.
- Your choice of Monster front wheel with tire, single or dual-flanged.
- 11.5” front rotor. Two front rotors will only be supplied if a dual-disc front wheel is selected.
- Your choice of any two Trojan fenders.
- Your choice of Exile Forward Controls.
Note:
Please Note: There will be no price reduction if only part of the ‘deal’ is required. Please just buy the items individually. This is a fixed price deal. Some customers may save more than others depending on the options selected. This factor was taken into consideration when fixing the price.
The pricing above includes the ‘standard’ finish for each part. Anodizing or powder-coating of parts will incur additional charges
Wheels Specs & Prices
M15-7-230 15"x 7" Monster rear wheel, satin or polished, incl. 230 Avon (9.2") $1,299
M15-6-200 15"x 6" Monster rear wheel, satin or polished, incl. 200 Metzeler (7.9") $1,249
M16-8-240 16"x 8" Monster rear wheel, satin or polished, incl. 240 Metzeler (9") $1,299
M17-7 17"x7" Monster rear wheel, satin or polished, NO TIRE (use stock HD 200 tire) $999
For those requiring a beefy front wheel to complement the rear Monster,
we offer matching front Monsters with the same huge 1/4" stainless spokes,
and polished aluminum rims:
M15-5-200F 15"x 5" Monster front wheel, satin or polished, incl. 200 Metzeler (7.45") $1199
M16-4.25-150F 16"x4.25" Monster front wheel, satin or polished, incl. 150 Metzeler or Avon (6.2") $1099
M21-3.5-120F 21"x 3.5" Monster front wheel, satin or polished, incl. 120 Metzeler (4.6") $1099
M21-2.15-90F 21"x 2.15" Monster front wheel, satin or polished, incl. 90 Metzeler or Avon $1099
'Spoolie' hubs are available for our Monster front wheels for those running no front brake at all.
For black (satin or gloss) powder-coated rim and/or hub Add $100
For non-black powder-coated rim and/or hub Add $150
Any other tire can be requested, just let us know when you order what tire you want us to fit. Please note that the 150 is the widest front tire available. All tires above 150 series are rear tires, and you must take full responsibility for deciding to run a rear tire on the front of your bike. We offer a huge variety of spoked wheels for stock and custom applications. Billet aluminum hubs can be laced to any available rim-size using an array of spoke designs. Plating, powder-coating, anodizing, polishing; many custom finishes are available. Wheels have been laced with up to 200 spokes. Call for quote
Solid Monster Wheels Details on request
Seats/Kickstands
LSSMTC Leaf–spring seat mechanism to mount LePera solo seat to TwinCam Softail $349
SAT Seat area trim, TwinCam Softail, black $49
ESM Exile Seat Mechanism, with shock, mounts, tabs and hardware $399
This system uses a small shock absorber under the seat to provide suspension on a rigid frame. It cannot be used unless you have a round oil tank as the shock interferes with the conventional horse-shoe style tank. The mechanism comes with the necessary weld-on mounts for the frame. Works great with LePera solo seats.
L100 Le Pera seat base, raw steel, compatible with LSSMTC and ESM $125
L105 Le Pera solo seat, compatible with LSSMTC and ESM, no skirt $189
L107 Le Pera seat, compatible with LSSMTC and ESM, with skirt $189
ESB Exile seat base, raw steel $99
This raw steel seat base is designed to be a perfect fit for the seat triangle area on our rigid frames, but it also makes a great starting point for a seat for most other custom rigid (or Softail) applications.
Kickstands
KSA Stainless steel kickstand with weld-on tab $249
KSA-TC Stainless steel kickstand with black billet clamp for TwinCam Softails $399
Compatible with a stock primary, the clamp engages the frame cross-member to prevent any possible rotation, and kickstand position is adjustable – both in the up and down position.
