STTT "Sani-Tree" triple trees, show-polished

STTTB "Sani-Tree" triple trees, black anodized

"Sani-Tree" triple trees are drilled and tapped for use with the "Hidden" fork-stop system, but they can be used with any style of neck bearing cup. For a super-clean look, these trees are recessed to sit down over the bearing cup. On frames with cast necks with no separate neck cups (e.g. stock frames), there may be the possibility of slight interference.

HFK "Hidden" fork-stop kit

UHDK Urethane handlebar damper kit

NBRS Neck bearing (2) and race (2) set

FF001 For '81-'84FL, '84-up FXSTC, '84-'86 FXWG, '83-up FLT/FLHT/FLHS

FA001S FLT style (i.e. dresser models, dual disc)

FA002S FLST style (i.e. Heritage and Fatboy, single disc)

FA003S FXST style (i.e. Softail Custom, single disc)

These prices are for stock length assemblies. FLT assemblies measure 26.25" from center of axle to end of tube (i.e. bottom of fork cap). FLST is 2" longer than FLT, FXST is 4" longer than FLT.

Removal of unwanted caliper mounts (e.g. convert FLT-style to single disc) and show-polish sliders Add

12-600 Tech-Glide 250 complete front end, 0, 3, 6 or 8 degre

12-700 Fat-Glide 250 complete front end, 0, 3, 6 or 8 degree

12-800 Fat-Glide 300 complete front end, 0, 3, 6 or 8 degree

For smooth retro-styling on the above front ends Add

These front ends are supplied show-polished, and come complete with steering stops, front axle, fender mounts and caliper bracket mounts. The above prices are for stock (FLH) length assemblies and up to 6" over-stock. Stock length SJP assemblies measure 28" from underside of top tree to center of axle.

For every 2" beyond 6" over stock Add

All SJP products are now available in black anodized finish - add 10% to polished price.

12-300 Pair of billet sliders with stainless front axle and nut

12-400 Pair of slider/tube assemblies with stainless front axle and nut

This price is for stock (FLH) length assembly and up to 6" over-stock.

For every 2" beyond 6" over-stock Add

32-093 Caliper bracket for 86-99 'direct bolt-on' calipers on SJP fork sliders, left

This is the caliper bracket required to use the Exile front caliper on SJP sliders with an 11.5" rotor. SJP offers a wide range of brackets and calipers for other applications. Please state caliper type, rotor size, and right or left when ordering.

SJP offer a wide range of triple trees for 35mm, 39mm and 41mm fork tubes in a variety of rakes. They also offer mid-glide and wide-glide conversion kits for many stock HD models.Call for availability and pricing

15-200 Triple trees for 41mm fork tubes, 0, 3, 6 or 8 degree