BikesPure Sex DragsterSpecs & Price List


The following is a list of all the parts and labor required to order this Complete Bike Kit, ready to paint. The total price reflects the 10% discount on parts that we offer on orders that exceed $20,000. The list includes a Total Performance 121" motor and a JIMS 6-speed transmission, but you may order the drive-line of your choice. You may also delete or change any of the parts or labor items listed. Please visit the Complete Bike Kit section of this website. Bike Kits are shipped unassembled but complete, except for wiring supplies and some fasteners.

Item CodeQtyDescriptionPrice EachAmount
Parts
9010101Rigid frame, with axle, 45 degree$1,999.00$1,999.00
Misc1Misc - front leg stretch 2"$200.00$200.00
Wire tubes1Wire tubes in frame$75.00$75.00
HFK1Hide-away fork-stop kit$175.00$175.00
NBRS1Neck bearing and race set$25.00$25.00
12-660-081SJP Tech Glide front end, six degree, 8" over stock, SCOTCHBRITE$2,224.00$2,224.00
Misc1Misc - Exile Headlight bracket for SJP trees, SCOTCHBRITE$19.00$19.00
M213.5120S1Monster front wheel, 21"x 3.5" with 120 Metzeler tire, single-flanged, SCOTCHBRITE HUB AND RIM$1,099.00$1,099.00
FAS1Front axle spacers, kit$15.00$15.00
EFCP1Exile front brake caliper, 4-piston, SCOTCHBRITE$299.00$299.00
32-0931SJP bracket, for direct bolt-on 84-99 calipers, left, SCOTCHBRITE$119.00$119.00
EBR11.51Exile brake rotor, 11.5", stainless steel, SCOTCHBRITE$199.00$199.00
Misc1Misc - front rotor bolts (5)$10.00$10.00
60-3531SJP single headlight, 3.5", H4 halogen, SCOTCHBRITE$399.00$399.00
COK1Clip-on handlebar kit: includes two 41 mm clamps and two aluminum bar blanks$249.00$249.00
ITA1Internal Throttle Assembly$199.00$199.00
TCK1Throttle cable kit for internal throttle$25.00$25.00
TCA1Twist-Clutch Assembly, includes left twist assembly, pulley mechanism, cable, and cable stop$499.00$499.00
BKG1Billet knurled grips$149.00$149.00
S157230S1Monster Solid rear wheel, 15"x7", w/230 Avon, single flange, SCOTCHBRITE HUB AND RIM$1,199.00$1,199.00
RAS1Rear axle spacers, pair$15.00$15.00
SBK501P1Sprocket Brake Kit, 50 tooth, SCOTCHBRITE$649.00$649.00
ST10.51Short Trojan fender, 10.5"$399.00$399.00
SMS1Side-mount license plate bracket, raw steel, small - 3"x6"$49.00$49.00
LSM2Lazer Star 'micro-B' tail light, LED, SCOTCHBRITE$99.00$198.00
ESB1Seat base, raw steel, w/battery box and lid$99.00$99.00
OB151Oilbag, 15", with battery box and starter clearance$699.00$699.00
Misc1Misc - polish oilbag and SCOTCHBRITE$40.00$40.00
61-20891Rubber mount bushings (4)$25.00$25.00
49-27001Outlet fittings, straight (3)$15.00$15.00
2556-61High quality black oil line, 6'$25.00$25.00
58-13221Yuasa YTX20HL-BS battery$99.00$99.00
CGT1'The Dragster Tank', w/flush mount cap, and mounting kit$1,199.00$1,199.00
2107-77311Golan Products remote petcock$189.00$189.00
FCOO-K1Forward controls, no kickstand holes, no master cylinder, KNURLED PEGS, SCOTCHBRITE$699.00$699.00
3034-00051Jay Brake 3/4" master cylinder for stock applications, SCOTCHBRITE$122.95$122.95
FCSR1Stainless shift rod with two SS heim joints$80.00$80.00
FCBR1Stainless brake push-rod with SS heim joint$60.00$60.00
KSA1Kick-stand assembly, weld-on, with stainless kickstand, SCOTCHBRITE$199.00$199.00
80201JIMS 6-speed, clean-cut gears, SCOTCHBRITE$2,799.00$2,799.00
Misc1Misc - clutch pushrod$20.00$20.00
NB1Neutral Blanker$30.00$30.00
SSP2Speedo sensor plate$40.00$80.00
CTP0.751Custom transmission plate, 0.75" offset$75.00$75.00
TC189N21Tech Cycle 2.0KW starter (1/4.20 thread)$399.00$399.00
SC1Starter Cover, billet, SCOTCHBRITE$99.00$99.00
P-48-76-S-0.751Primo 3" open belt kit with clutch, no motor plate, with 0.75" pulley offset, AND BLACK DIAPHRAGM$849.00$849.00
MBPF1Exile Motor Brace Plate with spin-on oil filter, SCOTCHBRITE$249.00$249.00
PP-4001Primo chrome steel rotor cover$19.00$19.00
PP-106-4-NH1Primo chromed aluminum domed clutch cover$29.00$29.00
PC1Exile front pulley cover$249.00$249.00
Misc1Misc - polish pulley cover and SCOTCHBRITE$30.00$30.00
ESK1Exile starter kit for use with Primo 3" belt kit, polished, SCOTCHBRITE$799.00$799.00
OTS25B1Offset transmission sprocket, 25T, 0.75" offset$149.00$149.00
TSS1Transmission sprocket spacer, for late model seal$30.00$30.00
35211-361Sprocket nut$10.00$10.00
RK1Nickel-plated 'O'-ring chain$120.00$120.00
TP1211Total Performance 121" motor, polished, we supply S&S Super G carb and billet pushrod tubes$7,999.00$7,999.00
170161Compufire 32 amp charging system, inc regulator$245.00$245.00
EPC1Exile smooth billet points cover, SCOTCHBRITE$39.00$39.00
245291Crane HI-4 single fire performance coil$159.00$159.00
PWK1Plug wire kit$20.00$20.00
SSMH1Stainless steel hardware kit to mount motor$29.00$29.00
TMM1Exile billet top motor mount, SCOTCHBRITE$249.00$249.00
MSP1Exile Monster 'Shotgun' pipes (raw steel), includes baffles w/ polished billet tips$399.00$399.00
Olympic1Finish for pipes - High Temp sterling silver, SCOTCHBRITE$200.00$200.00
41-04881Exhaust pipe flange kit, evo$25.00$25.00
Misc1Misc - exhaust gaskets, pair$5.00$5.00
EIS1Exile ignition switch with billet mount, SCOTCHBRITE$99.00$99.00
GHSK-SS1Goodridge hydraulic supply kit, stainless steel$400.00$400.00
Discount1Customer Discount - 10%-$2,994.10-$2,994.10
Labor
L161Install neck races in neck cups$10.00$10.00
L171Install neck cups in frame$25.00$25.00
L11Shop labor - weld kickstand mount to frame$50.00$50.00
L191Weld mount for rear master cylinder$50.00$50.00
L21Shop labor - weld oilbag mounts to frame$100.00$100.00
L361Shop labor - mount seat base to frame and rear fender to seat base, like 'Pure Sex Dragster'$400.00$400.00
L81Shop labor - weld mounts for Dragster tank$150.00$150.00
L211Mount remote petcock in frame$100.00$100.00
L61Shop labor - weld exhaust mounting tabs to frame$150.00$150.00
L291Mount rear micro 'B' Laser Star tail lights$100.00$100.00
L221Mock assemble front end and adjust axle spacing$150.00$150.00
L151Drill/tap SJP trees to accept "hidden" fork-stop kit, and install$100.00$100.00
L91Mount regulator under transmission plate$25.00$25.00
L101Drill & tap top motor mount to mount coil$25.00$25.00
L441Notch oilbag for nosecone clearance$50.00$50.00
L281Machine starter kit to accommodate motor brace plate with offset, and supply appropriate spacers$50.00$50.00
L391Drill and tap JIMS transmission end cover to accept Twist Clutch cable anchor$100.00$100.00
L401Final fabrication of Clip-on handlebar kit$500.00$500.00
L381Misc - additional fabrication - weld clutch cable tabs to frame, weld wire loom tabs to frame, weld ground stud to frame$125.00$125.00
L451Scotchbrite labor on all polished parts$500.00$500.00
TOTAL$29,706.85