Bikes
Hot RodSpecs & Price List
Hot RodSpecs & Price ListThe following is a list of all the parts and labor required to order this Complete Bike Kit, ready to paint. The total price reflects the 10% discount on parts that we offer on orders that exceed $20,000. The list includes a Total Performance 121" motor and a JIMS 6-speed transmission, but you may order the drive-line of your choice. You may also delete or change any of the parts or labor items listed. Please visit the Complete Bike Kit section of this website. Bike Kits are shipped unassembled but complete, except for wiring supplies and some fasteners.
| Item Code | Qty | Description | Price Each | Amount |
|---|---|---|---|---|
| Parts | ||||
| 901010 | 1 | Rigid frame, with axle, 32 degree | $1,999.00 | $1,999.00 |
| Wire tubes | 1 | Wire tubes in frame | $75.00 | $75.00 |
| HFK | 1 | Hide-away fork-stop kit | $175.00 | $175.00 |
| NBRS | 1 | Neck bearing and race set | $25.00 | $25.00 |
| FA001S | 1 | Showa fork slider and tube assembly, FLT-style, SATIN BLACK POWDERCOAT | $699.00 | $699.00 |
| FT41+1FLT | 1 | Fork tubes 1" over stock FLT | $200.00 | $200.00 |
| 160052 | 1 | Rubber fork boots, black | $5.00 | $5.00 |
| FF001 | 1 | Flush Front Axle | $139.00 | $139.00 |
| STTT | 1 | Sani-Tree triple trees, SCOTCHBRITE | $599.00 | $599.00 |
| Misc | 1 | Misc - Exile headlight bracket (countersunk) for Sani-Trees, w/flathead bolt, SCOTCHBRITE | $19.00 | $19.00 |
| M155200S | 1 | Monster front wheel, 15"x5", with 200 WHITEWALL Metzeler tire, single-flange, SCOTCHBRITE HUB, SATIN RED POWDERCOAT RIM | $1,774.00 | $1,774.00 |
| FAS | 1 | Front axle spacers, kit | $15.00 | $15.00 |
| EFCP | 1 | Exile front brake caliper, 4-piston, SCOTCHBRITE | $299.00 | $299.00 |
| EBR11.5 | 1 | Exile brake rotor, 11.5", stainless steel, SCOTCHBRITE | $199.00 | $199.00 |
| Misc | 1 | Misc - front brake rotor bolts (5) | $10.00 | $10.00 |
| 60-353 | 1 | SJP single headlight, 3.5", H4 halogen, SCOTCHBRITE | $399.00 | $399.00 |
| FBHB | 1 | FatBar Highbars, 1.25" stainless steel, w/integral risers, internal throttle, and rubber grips, SATIN BLACK POWDERCOAT | $723.00 | $723.00 |
| UHDK | 1 | Urethane handlebar damper kit | $25.00 | $25.00 |
| TCK | 1 | Throttle cable kit for internal throttle | $25.00 | $25.00 |
| M157230S | 1 | Monster rear wheel, 15"x7" withWHITEWALL Avon 230 tire, single flange, SCOTCHBRITE HUB, SATIN RED POWDERCOAT RIM | $1,824.00 | $1,824.00 |
| RAS | 1 | Rear axle spacers, kit | $15.00 | $15.00 |
| SBK501P | 1 | Sprocket Brake Kit, 50 tooth, SCOTCHBRITE | $649.00 | $649.00 |
| ST10.5 | 1 | Short Trojan fender, 10.5" | $399.00 | $399.00 |
| FMK2 | 1 | Fender mounting kit for passenger use | $100.00 | $100.00 |
| 340308 | 1 | Sparto style tail light | $37.99 | $37.99 |
| BLPS | 1 | Black metal license plate surround | $15.00 | $15.00 |
| ESM | 1 | Exile seat mechanism with shock | $399.00 | $399.00 |
| L-105 | 1 | Le Pera solo seat, no skirt, BLACK SUEDE TOP | $249.00 | $249.00 |
| OB15 | 1 | Oilbag, 15", with battery box and starter clearance | $699.00 | $699.00 |
| Misc | 1 | Misc - polish oilbag | $40.00 | $40.00 |
| Misc | 1 | Misc - SATIN BLACK POWDERCOAT for oilbag | $100.00 | $100.00 |
| 61-2089 | 1 | Rubber mount bushings (4) | $25.00 | $25.00 |
| 49-2700 | 1 | Outlet fittings, straight (3) | $15.00 | $15.00 |
| 2556-6 | 1 | High quality black oil line, 6' | $25.00 | $25.00 |
| 58-1322 | 1 | Yuasa YTX20HL-BS battery | $99.00 | $99.00 |
| 25573 | 1 | King Sportster gastank, 3.25 gal, for screw-in cap | $149.99 | $149.99 |
| LPGC | 1 | Exile lo-profile aluminum gas cap, VENTED, SCOTCHBRITE | $49.00 | $49.00 |
| 27087 | 1 | Pingel polished aluminum petcock | $79.00 | $79.00 |
| FCOO | 1 | Forward Controls, no kickstand holes, no master cylinder, for FOOT CLUTCH, SCOTCHBRITE | $849.00 | $849.00 |
| BCC | 1 | Barnett clutch cable, for FOOT CLUTCH | $55.00 | $55.00 |
| 3034-0005 | 1 | Jay Brake 3/4" master cylinder for stock applications, SCOTCHBRITE | $122.95 | $122.95 |
| FCBR | 1 | Stainless brake push-rod with SS heim joint | $60.00 | $60.00 |
| KSA | 1 | Kick-stand assembly, weld-on, with stainless kickstand, SCOTCHBRITE | $199.00 | $199.00 |
| 8020 | 1 | JIMS 6-speed, clean-cut gears, SCOTCHBRITE | $2,799.00 | $2,799.00 |
| Misc | 1 | Misc - clutch pushrod | $20.00 | $20.00 |
| HS | 1 | Hand Shift knob w/raw shift arm and brake line-lock | $299.00 | $299.00 |
| Misc | 1 | Misc - SATIN BLACK POWDERCOAT for shift arm (after fabrication) | $40.00 | $40.00 |
| NB | 1 | Neutral Blanker | $30.00 | $30.00 |
| SSP | 2 | Speedo sensor plate | $40.00 | $80.00 |
| 103620 | 1 | Billet kickstart kit for 6 speed, 2" kickarm offset, SCOTCHBRITE | $754.95 | $754.95 |
| CTP0.75 | 1 | Custom transmission plate, 0.75" offset | $75.00 | $75.00 |
| TC189N2 | 1 | Tech Cycle 2.0KW starter (1/4.20 thread) | $399.00 | $399.00 |
| SC | 1 | Starter Cover, billet, SCOTCHBRITE | $99.00 | $99.00 |
| P-48-76-S-0.75 | 1 | Primo 3" open belt kit with clutch, no motor plate, with 0.75" pulley offset | $849.00 | $849.00 |
| MBPF | 1 | Motor Brace Plate with spin-on oil filter, SCOTCHBRITE | $249.00 | $249.00 |
| PP-400 | 1 | Primo chrome steel rotor cover | $19.00 | $19.00 |
| PP-106-4-NH | 1 | Primo chromed aluminum domed clutch cover | $29.00 | $29.00 |
| PC | 1 | Exile front pulley cover | $249.00 | $249.00 |
| Misc | 1 | Misc - polish pulley cover and SCOTCHBRITE | $30.00 | $30.00 |
| ESK | 1 | Exile starter kit for use with Primo 3" belt kit, SCOTCHBRITE | $799.00 | $799.00 |
| OTS25B | 1 | Offset transmission sprocket, 25T, 0.75" offset | $149.00 | $149.00 |
| TSS | 1 | Transmission sprocket spacer, for late model seal | $30.00 | $30.00 |
| 35211-36 | 1 | Sprocket nut | $10.00 | $10.00 |
| RK | 1 | Nickel-plated 'O'-ring chain | $120.00 | $120.00 |
| TP121 | 1 | Total Performance 121" motor, polished, we supply S&S Super G carb and billet pushrod tubes, SCOTCHBRITE | $7,999.00 | $7,999.00 |
| GAC | 1 | Goodson Air Cleaner, SCOTCHBRITE | $199.00 | $199.00 |
| 84332 | 1 | Adjustable S&S choke device for use with Goodson air cleaner | $18.95 | $18.95 |
| 17016 | 1 | Compufire 32 amp charging system, inc regulator | $245.00 | $245.00 |
| EPC | 1 | Exile smooth billet points cover, SCOTCHBRITE | $39.00 | $39.00 |
| 24529 | 1 | Crane HI-4 single fire performance coil | $159.00 | $159.00 |
| PWK | 1 | Plug wire kit | $20.00 | $20.00 |
| SSMH | 1 | Stainless steel hardware kit to mount motor | $29.00 | $29.00 |
| TMM | 1 | Exile billet top motor mount, SCOTCHBRITE | $249.00 | $249.00 |
| EMDP | 1 | Exile 2.5" Monster drag pipes, NO BAFFLES (will be modified with 'trumpet' tips) | $399.00 | $399.00 |
| Olympic | 1 | Finish for pipes - High Temp BLACK | $200.00 | $200.00 |
| 500315 | 1 | 50' roll of light brown exhaust wrap | $67.99 | $67.99 |
| 41-0488 | 1 | Exhaust pipe flange kit, evo | $25.00 | $25.00 |
| Misc | 1 | Misc - exhaust gaskets, pair | $5.00 | $5.00 |
| EIS | 1 | Exile ignition switch with billet mount, SCOTCHBRITE | $99.00 | $99.00 |
| GHSK-SS | 1 | Goodridge hydraulic supply kit, stainless steel, ACCOMODATES LINE LOCK | $400.00 | $400.00 |
| Discount | 1 | Customer Discount - 10% | -$3,094.18 | -$3,094.18 |
| Labor | ||||
| L16 | 1 | Install neck races in neck cups | $10.00 | $10.00 |
| L17 | 1 | Install neck cups in frame | $25.00 | $25.00 |
| L1 | 1 | Shop labor - weld kickstand mount to frame | $50.00 | $50.00 |
| L49 | 1 | Weld mount for line lock to frame | $50.00 | $50.00 |
| L19 | 1 | Weld mount for rear master cylinder | $50.00 | $50.00 |
| L2 | 1 | Shop labor - weld oilbag mounts to frame | $100.00 | $100.00 |
| L4 | 1 | Weld mounts for seat mechanism to frame | $100.00 | $100.00 |
| L34 | 1 | Weld tabs for passenger pegs to frame | $100.00 | $100.00 |
| L8 | 1 | Shop labor - weld mounts for Sportster style tank | $150.00 | $150.00 |
| L6 | 1 | Shop labor - weld exhaust mounting tabs to frame | $150.00 | $150.00 |
| L46 | 1 | Modify 'monster drag pipes' to accept trumpet tips | $100.00 | $100.00 |
| L7 | 1 | Shop labor - modify axle head for exhaust clearance | $75.00 | $75.00 |
| L3 | 1 | Shop labor - mount rear fender w/passenger strength | $400.00 | $400.00 |
| L26 | 1 | Mount Sparto taillight and license plate bracket to fender | $175.00 | $175.00 |
| L18 | 1 | Remove right caliper mount, fender mounts, and show polish FLT fork legs before powdercoat (includes disassembly/final reassembly) | $150.00 | $150.00 |
| L22 | 1 | Mock assemble front end, adjust axle spacing, and machine fork caps to accept Sani-Trees | $150.00 | $150.00 |
| L48 | 1 | Install hideaway fork stop in lower Sani-Tree | $25.00 | $25.00 |
| L9 | 1 | Mount regulator under transmission plate | $25.00 | $25.00 |
| L10 | 1 | Drill & tap top motor mount to mount coil | $25.00 | $25.00 |
| L11 | 1 | Mount kicker kit to transmission | $100.00 | $100.00 |
| L44 | 1 | Notch oilbag for nosecone clearance | $50.00 | $50.00 |
| L28 | 1 | Machine starter kit to accommodate motor brace plate with offset, and supply appropriate spacers | $50.00 | $50.00 |
| L47 | 1 | Modify electric start kit to accept hand-shift arm | $50.00 | $50.00 |
| L38 | 1 | Misc - additional fabrication - weld wire loom tabs to frame, weld ground stud to frame | $75.00 | $75.00 |
| L45 | 1 | Scotchbrite labor on all polished parts | $500.00 | $500.00 |
| TOTAL | $30,582.64 | |||