Bikes
Fat TrackerSpecs & Price List
Fat TrackerSpecs & Price ListThe following is a list of all the parts and labor required to order this Complete Bike Kit, ready to paint. The total price reflects the 10% discount on parts that we offer on orders that exceed $20,000. The list includes a Total Performance 121" motor and a JIMS 6-speed transmission, but you may order the drive-line of your choice. You may also delete or change any of the parts or labor items listed. Please visit the Complete Bike Kit section of this website. Bike Kits are shipped unassembled but complete, except for wiring supplies and some fasteners.
| Item Code | Qty | Description | Price Each | Amount |
|---|---|---|---|---|
| Parts | ||||
| 901000 | 1 | Softail frame, w swinger, pivot axle & rock-guard, 35 degree, no factory tank mounts | $2,749.00 | $2,749.00 |
| Wire tubes | 1 | Wire tubes in frame | $75.00 | $75.00 |
| Works Perf | 1 | Works Performance adjustable length Softail shocks, black | $499.95 | $499.95 |
| 28399 | 1 | Softail shock mounting hardware, cadmium | $16.19 | $16.19 |
| HFK | 1 | Hide-away fork-stop kit | $175.00 | $175.00 |
| NBRS | 1 | Neck bearing and race set | $25.00 | $25.00 |
| FA001S | 1 | Show fork slider and tube assembly, FL-style, POLISHED FINISH | $399.00 | $399.00 |
| FT41+1FLT | 1 | Fork tubes 1" over stock FL | $200.00 | $200.00 |
| 160052 | 1 | Rubber fork boots, black | $5.00 | $5.00 |
| FF001 | 1 | Flush Front Axle | $139.00 | $139.00 |
| STTT | 1 | Sani-Tree triple trees, POLISHED | $599.00 | $599.00 |
| Misc | 1 | Misc - Exile headlight bracket (countersunk) for Sani-Trees, w/flathead bolt, POLISHED | $19.00 | $19.00 |
| M155200S | 1 | Monster front wheel, 15"x5", with 200 Metzeler tire, single-flange, POLISHED FINISH | $1,149.00 | $1,149.00 |
| FAS | 1 | Front axle spacers, kit | $15.00 | $15.00 |
| EFCP | 1 | Exile front brake caliper, 4-piston, polished | $299.00 | $299.00 |
| EBR11.5 | 1 | Exile brake rotor, 11.5", stainless steel | $199.00 | $199.00 |
| Misc | 1 | Misc - front brake rotor bolts (5) | $10.00 | $10.00 |
| FT | 1 | Front Trojan fender | $399.00 | $399.00 |
| 60-353 | 1 | SJP single headlight, 3.5", H4 halogen | $399.00 | $399.00 |
| FBSB | 1 | Fatbar 'Sportster' bars, 1.25" stainless, w/integral risers, internal throttle, and rubber grips, POLISHED | $548.00 | $548.00 |
| UHDK | 1 | Urethane handlebar damper kit | $25.00 | $25.00 |
| TCK | 1 | Throttle cable kit for internal throttle | $25.00 | $25.00 |
| BCC | 1 | Barnett clutch cable | $55.00 | $55.00 |
| 0062-2015 | 1 | PM clutch lever and perch, polished | $169.00 | $169.00 |
| 0062-2605 | 1 | PM front brake master cylinder and lever, 5/8", polished | $229.00 | $229.00 |
| M157230S | 1 | Monster rear wheel, 15"x7" with 230 tire, single flange, POLISHED FINISH | $1,199.00 | $1,199.00 |
| RAS | 1 | Rear axle spacers | $15.00 | $15.00 |
| SBK481P | 1 | Sprocket Brake Kit, 48 tooth, polished caliper | $649.00 | $649.00 |
| Misc | 1 | Misc - Milwaukee Iron passenger strength, 'Slim Jim' softail fender | $600.00 | $600.00 |
| SMS | 1 | Side-mount license plate bracket, raw steel, small - 3"x6" | $49.00 | $49.00 |
| LSM | 2 | Lazer Star 'micro-B' tail light, polished | $99.00 | $198.00 |
| ESB | 1 | Seat base, raw steel, w/battery box | $99.00 | $99.00 |
| OB15 | 1 | Oilbag, 15", with battery box and starter clearance | $699.00 | $699.00 |
| Misc | 1 | Misc - polish oilbag | $40.00 | $40.00 |
| 61-2089 | 1 | Rubber mount bushings (4) | $25.00 | $25.00 |
| 49-2700 | 1 | Outlet fittings, straight (3) | $15.00 | $15.00 |
| 2556-6 | 1 | High quality black oil line, 6' | $24.49 | $24.49 |
| 58-1322 | 1 | Yuasa YTX20HL-BS battery | $91.99 | $91.99 |
| 25573 | 1 | 3.25 King Sportster gastank, for screw-in cap | $149.99 | $149.99 |
| LPGC | 1 | Exile lo-profile aluminum gas caps, single, VENTED, POLISHED | $49.00 | $49.00 |
| 27087 | 1 | Pingel polished aluminum petcock | $79.00 | $79.00 |
| FCOO | 1 | Forward Controls, no kickstand holes, no master cylinder, POLISHED | $699.00 | $699.00 |
| 3034-0011 | 1 | Jay Brake 5/8" master cylinder for stock applications, polished | $122.95 | $122.95 |
| FCBR | 1 | Stainless brake push-rod with SS heim joint | $50.00 | $50.00 |
| FCSR | 1 | Stainless shift rod with two SS heim joints | $80.00 | $80.00 |
| KSA | 1 | Kick-stand assembly, weld-on, with stainless kickstand, POLISHED | $199.00 | $199.00 |
| 8020 | 1 | JIMS 6-speed, clean-cut gears, polished case | $2,799.00 | $2,799.00 |
| Misc | 1 | Misc - clutch pushrod | $20.00 | $20.00 |
| Misc | 1 | Misc - transmission shift lever | $20.00 | $20.00 |
| NB | 1 | Neutral Blanker | $30.00 | $30.00 |
| SSP | 2 | Speedo sensor plate | $40.00 | $80.00 |
| 103520 | 1 | Sharp Eye kickstart assembly w/kickarm and pedal, 5 speed, H-D style trapdoor, 2" offset arm | $754.95 | $754.95 |
| CTP0.75 | 1 | Custom transmission plate, 0.75" offset | $75.00 | $75.00 |
| TC189N2 | 1 | Tech Cycle 2.0KW starter (1/4.20 thread) | $399.00 | $399.00 |
| SC | 1 | Starter Cover, billet, polished | $99.00 | $99.00 |
| P-48-76-S | 1 | Primo 3" open belt kit with clutch, no motor plate, with 0.75" pulley offset | $849.00 | $849.00 |
| MBPF | 1 | Motor Brace Plate with spin-on oil filter | $249.00 | $249.00 |
| PP-400 | 1 | Primo chrome steel rotor cover | $19.00 | $19.00 |
| PP-106-4-NH | 1 | Primo chromed aluminum domed clutch cover | $29.00 | $29.00 |
| PC | 1 | Exile front pulley cover, POLISHED | $249.00 | $249.00 |
| Misc | 1 | Misc - polish pulley cover | $30.00 | $30.00 |
| ESK | 1 | Exile starter kit for use with Primo 3" belt kit, POLISHED | $749.00 | $749.00 |
| OTS24B | 1 | Offset transmission sprocket, 24 tooth, 0.75" offset | $149.00 | $149.00 |
| TSS | 1 | Transmission sprocket spacer, for late model seal | $30.00 | $30.00 |
| 35211-36 | 1 | Sprocket nut | $10.00 | $10.00 |
| RK | 1 | Nickel-plated 'O'-ring chain | $120.00 | $120.00 |
| TP121 | 1 | Total Performance 121" motor, polished, we supply S&S Super G carb and JIMS pushrod tubes | $7,999.00 | $7,999.00 |
| 17016 | 1 | Compufire 32 amp charging system, inc regulator | $244.94 | $244.94 |
| EPC | 1 | Exile smooth billet points cover, polished | $39.00 | $39.00 |
| 24529 | 1 | Crane HI-4 single fire performance coil | $159.19 | $159.19 |
| PWK | 1 | Plug wires | $20.00 | $20.00 |
| SSMH | 1 | Stainless steel hardware kit to mount motor | $20.00 | $20.00 |
| TMM | 1 | Exile billet top motor mount | $249.00 | $249.00 |
| EMDP | 1 | Exile 2.5" Monster drag pipes with baffles and polished billet tip (raw steel) | $399.00 | $399.00 |
| Olympic | 1 | Finish for pipes - High Temp Silver | $200.00 | $200.00 |
| 41-0488 | 1 | Exhaust pipe flange kit, evo | $23.45 | $23.45 |
| Misc | 1 | Misc - exhaust gaskets, pair | $5.00 | $5.00 |
| EIS | 1 | Exile ignition switch with billet mount | $99.00 | $99.00 |
| GHSK-SS | 1 | Goodridge hydraulic supply kit, stainless steel | $400.00 | $400.00 |
| Discount | 1 | Customer Discount - 10% | -$3,017.31 | -$3,017.31 |
| Labor | ||||
| L16 | 1 | Install neck races in neck cups | $10.00 | $10.00 |
| L17 | 1 | Install neck cups in frame | $25.00 | $25.00 |
| L1 | 1 | Shop labor - weld kickstand mount to frame | $50.00 | $50.00 |
| L19 | 1 | Weld mount for rear master cylinder | $50.00 | $50.00 |
| L2 | 1 | Shop labor - weld oilbag mounts to frame | $100.00 | $100.00 |
| L5 | 1 | Shop labor - mount steel solo seat base to frame, use MILWAUKEE IRON fender cut-out as back-piece | $200.00 | $200.00 |
| L8 | 1 | Shop labor - weld mounts for Sportster style tank | $150.00 | $150.00 |
| L6 | 1 | Shop labor - weld exhaust mounting tabs to frame | $150.00 | $150.00 |
| L7 | 1 | Shop labor - modify axle head for exhaust clearance | $75.00 | $75.00 |
| L3 | 1 | Shop labor - mount rear fender to frame | $500.00 | $500.00 |
| L18 | 1 | Remove right caliper mount, clearance sliders and show polish FLT fork legs (includes disassembly/reassembly) | $150.00 | $150.00 |
| L22 | 1 | Mock assemble front end, fit Trojan fender, adjust axle spacing, and machine fork caps to accept Sani-Trees | $200.00 | $200.00 |
| L48 | 1 | Install hideaway fork stop in lower Sani-Tree | $25.00 | $25.00 |
| L9 | 1 | Mount regulator under transmission plate | $25.00 | $25.00 |
| L10 | 1 | Drill & tap top motor mount to mount coil | $25.00 | $25.00 |
| L11 | 1 | Mount kicker kit to transmission | $100.00 | $100.00 |
| L44 | 1 | Notch oilbag for nosecone clearance | $50.00 | $50.00 |
| L28 | 1 | Machine starter kit to accommodate motor brace plate with offset, and supply appropriate spacers | $50.00 | $50.00 |
| L38 | 1 | Misc - additional fabrication - weld clutch cable tabs to frame, weld wire loom tabs to frame, weld ground stud to frame | $150.00 | $150.00 |
| L13 | 2 | Shop labor - bore PM control to fit 1.25" bars | $50.00 | $100.00 |
| TOTAL | $29,340.78 | |||