Bikes
Fat BlokeSpecs & Price List
Fat BlokeSpecs & Price ListThe following is a list of all the parts and labor required to order this Complete Bike Kit, ready to paint. The total price reflects the 10% discount on parts that we offer on orders that exceed $20,000. The list includes a Total Performance 121" motor and a JIMS 6-speed transmission, but you may order the drive-line of your choice. You may also delete or change any of the parts or labor items listed. Please visit the Complete Bike Kit section of this website. Bike Kits are shipped unassembled but complete, except for wiring supplies and some fasteners.
| Item Code | Qty | Description | Price Each | Amount |
|---|---|---|---|---|
| Parts | ||||
| 901000 | 1 | Softail frame, w swingarm, pivot axle & rock-guard, 35 degree | $2,749.00 | $2,749.00 |
| Wire tubes | 1 | Wire tubes in frame | $75.00 | $75.00 |
| Works Perf | 1 | Works Performance adjustable length Softail shocks, black | $499.95 | $499.95 |
| 28399 | 1 | Softail shock mounting hardware, cadmium | $16.19 | $16.19 |
| HFK | 1 | Hide-away fork-stop kit | $175.00 | $175.00 |
| NBRS | 1 | Neck bearing and race set | $25.00 | $25.00 |
| 12-800-00 | 1 | SJP Extra -wide Fat Glide 300 front end, zero degree, stock length, SCOTCHBRITE | $2,699.00 | $2,699.00 |
| Misc | 1 | Misc - Exile Headlight bracket for SJP trees, SCOTCHBRITE | $19.00 | $19.00 |
| M155200S | 1 | Monster front wheel, 15"x5", with 200 Metzeler tire, single-flange, SCOTCHBRITE HUB AND RIM | $1,149.00 | $1,149.00 |
| FAS | 1 | Front axle spacers, kit | $15.00 | $15.00 |
| 6712586A | 1 | Speedo drive for front wheel | $55.00 | $55.00 |
| EFCP | 1 | Exile front brake caliper, 4-piston, SCOTCHBRITE | $299.00 | $299.00 |
| 32-093 | 1 | SJP bracket, for direct bolt-on 84-99 calipers, left, SCOTCHBRITE | $119.00 | $119.00 |
| EBR11.5 | 1 | Exile brake rotor, 11.5", stainless steel, SCOTCHBRITE | $199.00 | $199.00 |
| Misc | 1 | Misc - front rotor bolts | $10.00 | $10.00 |
| Misc | 1 | Misc - front hub spacer, SCOTCHBRITE | $39.00 | $39.00 |
| FT | 1 | Front Trojan fender | $399.00 | $399.00 |
| 60-353 | 1 | SJP single headlight, 3.5", H4 halogen, SCOTCHBRITE | $399.00 | $399.00 |
| FBWB | 1 | Fatbar widebars, 1.25" stainless steel, w/integral risers, integral perches/levers, internal throttle, and rubber grips, SCOTCHBRITE | $848.00 | $848.00 |
| TCK | 1 | Throttle cable kit for internal throttle | $25.00 | $25.00 |
| BCC | 1 | Barnett clutch cable | $55.00 | $55.00 |
| RFMC | 1 | Remote front master cylinder with cable, mounting tab etc. | $349.00 | $349.00 |
| M157230S | 1 | Monster rear wheel, 15"x7" with 230 tire, single flange, SCOTCHBRITE HUB AND RIM | $1,199.00 | $1,199.00 |
| RAS | 1 | Rear axle spacers | $15.00 | $15.00 |
| SBK481P | 1 | Sprocket Brake Kit, 48 tooth, SCOTCHBRITE | $649.00 | $649.00 |
| ST10.5 | 1 | Short Trojan fender, 10.5" | $399.00 | $399.00 |
| FMK | 1 | Fender Mounting Kit | $50.00 | $50.00 |
| 340308 | 1 | Sparto style tail light, | $37.99 | $37.99 |
| BLPS | 1 | Black metal license plate surround | $15.00 | $15.00 |
| Misc | 1 | Misc - Exile sprung seat mounting kit for softail | $100.00 | $100.00 |
| L-107-E | 1 | Exile sprung seat with skirt by Le Pera | $149.00 | $149.00 |
| OB15 | 1 | Oilbag, 15", with battery box and starter clearance | $699.00 | $699.00 |
| Misc | 1 | Misc - polish oilbag and SCOTCHBRITE | $40.00 | $40.00 |
| 61-2089 | 1 | Rubber mount bushings (4) | $25.00 | $25.00 |
| 49-2700 | 1 | Outlet fittings, straight (3) | $15.00 | $15.00 |
| 2556-6 | 1 | High quality black oil line, 6' | $25.00 | $25.00 |
| 58-1322 | 1 | Yuasa YTX20HL-BS battery | $99.00 | $99.00 |
| Misc | 1 | Misc - seat mechanism for softails | $149.00 | $149.00 |
| 15294 | 1 | Flatside 'fatbob' gastank, 6 gallon | $183.99 | $183.99 |
| LPGC | 1 | Exile lo-profile aluminum gas caps, pair, ONE VENTED, SCOTCHBRITE | $99.00 | $99.00 |
| 25550 | 1 | Flatside tank mounting kit | $54.39 | $54.39 |
| 27087 | 1 | Pingel polished aluminum petcock | $79.00 | $79.00 |
| 310194 | 1 | 3-light dash kit, inc dash, base plate and ignition switch | $135.99 | $135.99 |
| 27-981 | 1 | Speedo with tachometer | $124.95 | $124.95 |
| FCOO | 1 | Forward Controls, no kickstand holes, no master cylinder, SCOTCHBRITE | $699.00 | $699.00 |
| 3034-0011 | 1 | Jay Brake 5/8" master cylinder for stock applications, SCOTCHBRITE | $122.95 | $122.95 |
| FCBR | 1 | Stainless brake push-rod with SS heim joint | $60.00 | $60.00 |
| FCSR | 1 | Stainless shift rod with two SS heim joints | $80.00 | $80.00 |
| KSA | 1 | Kick-stand assembly, weld-on, with stainless kickstand, SCOTCHBRITE | $199.00 | $199.00 |
| 8020 | 1 | JIMS 6-speed, clean-cut gears, SCOTCHBRITE | $2,799.00 | $2,799.00 |
| Misc | 1 | Misc - clutch pushrod | $20.00 | $20.00 |
| NB | 1 | Neutral Blanker | $30.00 | $30.00 |
| SSP | 2 | Speedo sensor plate | $40.00 | $80.00 |
| 103620 | 1 | SharpEye billet kickstart assembly w/kickarm and pedal, 6 speed, JIMS/Baker trapdoor, 2" kickarm offset, SCOTCHBRITE | $754.95 | $754.95 |
| CTP0.75 | 1 | Custom transmission plate, 0.75" offset | $75.00 | $75.00 |
| TC189N2 | 1 | Tech Cycle 2.0KW starter (1/4.20 thread) | $399.00 | $399.00 |
| SC | 1 | Starter Cover, billet, SCOTCHBRITE | $99.00 | $99.00 |
| P-48-76-S-0.75 | 1 | Primo 3" open belt kit with clutch, no motor plate, with 0.75" pulley offset | $849.00 | $849.00 |
| MBPF | 1 | Motor Brace Plate with spin-on oil filter, SCOTCHBRITE | $249.00 | $249.00 |
| PP-400 | 1 | Primo chrome steel rotor cover | $19.00 | $19.00 |
| PP-106-4-NH | 1 | Primo chromed aluminum domed clutch cover | $29.00 | $29.00 |
| PC | 1 | Exile front pulley cover | $249.00 | $249.00 |
| Misc | 1 | Misc - polish pulley cover and SCOTCHBRITE | $30.00 | $30.00 |
| ESK | 1 | Exile starter kit for use with Primo 3" belt kit, SCOTCHBRITE | $799.00 | $799.00 |
| OTS24B | 1 | Offset transmission sprocket, 24 tooth, 0.75" offset | $149.00 | $149.00 |
| TSS | 1 | Transmission sprocket spacer, for late model seal | $30.00 | $30.00 |
| 35211-36 | 1 | Sprocket nut | $10.00 | $10.00 |
| RK | 1 | Nickel-plated 'O'-ring chain | $120.00 | $120.00 |
| TP121 | 1 | Total Performance 121" motor, polished, we supply S&S Super G carb and billet pushrod tubes, SCOTCHBRITE | $7,999.00 | $7,999.00 |
| 17016 | 1 | Compufire 32 amp charging system, inc regulator | $245.00 | $245.00 |
| EPC | 1 | Exile smooth billet points cover, SCOTCHBRITE | $39.00 | $39.00 |
| 24529 | 1 | Crane HI-4 single fire performance coil | $159.00 | $159.00 |
| PWK | 1 | Plug wires | $20.00 | $20.00 |
| SSMH | 1 | Stainless steel hardware kit to mount motor | $29.00 | $29.00 |
| TMM | 1 | Exile billet top motor mount, SCOTCHBRITE | $249.00 | $249.00 |
| EMDP | 1 | Exile 2.5" Monster drag pipes with baffles and polished billet tip (raw steel) | $399.00 | $399.00 |
| Olympic | 1 | Finish for pipes - High Temp sterling silver, SCOTCHBRITE | $200.00 | $200.00 |
| 41-0488 | 1 | Exhaust pipe flange kit, evo | $25.00 | $25.00 |
| Misc | 1 | Misc - exhaust gaskets | $5.00 | $5.00 |
| EIS | 1 | Exile ignition switch with billet mount, SCOTCHBRITE | $99.00 | $99.00 |
| GHSK-SS | 1 | Goodridge hydraulic supply kit, stainless steel | $400.00 | $400.00 |
| Discount | 1 | Customer Discount - 10% | -$3,249.04 | -$3,249.04 |
| Labor | ||||
| L16 | 1 | Install neck races in neck cups | $10.00 | $10.00 |
| L17 | 1 | Install neck cups in frame | $25.00 | $25.00 |
| L1 | 1 | Shop labor - weld kickstand mount to frame | $50.00 | $50.00 |
| L19 | 1 | Weld mount for rear master cylinder | $50.00 | $50.00 |
| L14 | 1 | Weld mount for front remote master cylinder | $50.00 | $50.00 |
| L2 | 1 | Shop labor - weld oilbag mounts to frame | $100.00 | $100.00 |
| L4 | 1 | Weld mounts for SOFTAIL seat mechanism to frame | $100.00 | $100.00 |
| L6 | 1 | Shop labor - weld exhaust mounting tabs to frame | $150.00 | $150.00 |
| L7 | 1 | Shop labor - modify axle head for exhaust clearance | $75.00 | $75.00 |
| L3 | 1 | Shop labor - mount rear fender to swingarm | $500.00 | $500.00 |
| L26 | 1 | Mount Sparto taillight and license plate bracket to rear fender | $175.00 | $175.00 |
| L22 | 1 | Mock assemble front end, fit Trojan fender, set up speedo sensor, and adjust axle spacing | $200.00 | $200.00 |
| L15 | 1 | Drill/tap SJP trees to accept "hidden" fork-stop kit, and install | $100.00 | $100.00 |
| L9 | 1 | Mount regulator under transmission plate | $25.00 | $25.00 |
| L10 | 1 | Drill & tap top motor mount to mount coil | $25.00 | $25.00 |
| L11 | 1 | Mount kicker kit to transmission | $100.00 | $100.00 |
| L44 | 1 | Notch oilbag for nosecone clearance | $50.00 | $50.00 |
| L28 | 1 | Machine starter kit to accomodate motor brace plate with offset, and supply appropriate spacers | $50.00 | $50.00 |
| L38 | 1 | Misc - additional fabrication - weld clutch cable tabs to frame, weld wire loom tabs to frame, weld ground stud to frame | $125.00 | $125.00 |
| L45 | 1 | Scotchbrite labor on all polished parts | $500.00 | $500.00 |
| TOTAL | $31,591.31 | |||