Stock Softail Parts
We have recently focused on developing a complete line of parts to transform a stock Harley Softail into a clean Exile machine.
To get your copy of the new catalog "Hard Parts For Stock Softails" click http://www.exilecycles.com/catalog.php
Our 2007 Softail Standard can be seen on our BIKES page, http://www.exilecycles.com/index.php?section=141
Our super-tough 05 Night Train is at http://www.exilecycles.com/index.php?section=151
Our racy 2009 Night Train can be seen at http://www.exilecycles.com/index.php?section=153
For information on our Monster Pipes for stock softails visit http://www.exilecycles.com/index.php?section=42
Our 'regular' parts, such as wheels, brakes, bars, trees, forwards, etc. are all available for stock Softail application, and some of
our newer parts are featured below.
We now offer a 3” open belt primary drive for both 5- and 6-speed Twin-Cam applications. Kit includes everything you need;
pulleys, belt, diaphragm clutch, starter ring-gear, starter/bearing support plate and front pulley cover for the price of $1,999.
The bike pictured has the optional centrifugal (semi-automatic) clutch which makes riding a foot-clutch bike very easy (adds $699).
The above picture also shows our foot-clutch forward set-up and our clamp-on kickstand installed.
These cool knurled pieces are the finishing touch for your Softail make-over! Shown above are; rear axle covers, front axle covers,
swing-arm pivot covers, oil-pressure switch cover, motor bolt covers, foot-pegs, oil-cap and gas-cap covers. All are available in chrome,
black or satin. Prices range from $39 for a satin oil-bag cap to $129 for a chrome set of gas-cap covers.
This polished stainless-steel kickstand comes with a powder-coated steel bracket that clamps to the frame of any Twin-Cam Softail, allowing you
to lose the bulky forward-mounted stock item! It can be installed without removing the stock primary, and it has a tab that engages the frame
cross-member for complete security. The angle is adjustable in both the open and closed position. Price $399.
This super-clean switch-bar can be installed into rubber or billet grips or even in to the handle-bar itself. It measures 3.5" x 0.75" and is only
about 0.2" thick! The switch-bar has one small wire that exits the bars and plugs in to a 5"x1"x1" module that is easily hidden under the tank. We
typically use the 4 switches to control left and right turn, horn and Hi/Lo. There are two other 'circuits' programmed in to the module so holding
two of the switches down at the same time can be used to operate starter and one other function of your choice. $399.
These ingenious plates bolt to any Twin-Cam Softail frame to allow use of any forward controls with evolution-era mounting-hole pattern
(most after-market controls). Machined from billet aluminum with black powder-coating, these plates are designed to match the frame perfectly
once installed. Forward control adapter plates $149.
How about this for the finishing touch! This brushed stainless steel speedo face has the numbers and our logo etched in to it so they
are illuminated in orange after dark. Speedo bezel is available in polished or black. Price $250.
You send in your speedo and the face and bezel are quickly and legally exchanged and your speedo returned (mileage unchanged).